Adjustable Voltage Adapter 4-Position Switch Regulator Converter 3.3V 5V 6V 9V

Description

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
Brand: RED WOLF
Model: DDC33109
Weight: 0.80 lbs
Features:
4-Position Switch Selects Desired Voltage Output
, No programming is required
3V for some cameras as a replacement power supply
5V uses include turning on the amp in older Ford vehicles
6V for OE reverse camera retention
9V for use with a wide range of devices that run on 9V
Not for use in 24V systems
accept an input voltage from 10V to 24V and provide a clean output of 3V, 5V, 6V or 9V
supply up to 2 Amps of power at 3. 3v, 5v or 6v, and is capable of supplying up to 1.5 Amps at the 9v setting
Wiring Overview
Green
10V-24V trigger input-this wire is the trigger wire to activate or turn-on the “DDC33109”
Red
Power input (high-current supply wire)-connect to 12V constant or switched power
Black
Chassis ground-connect to chassis ground
Blue
Regulated voltage output-connect this to the low voltage device to be powered by the” DDC33109”
Notice
When you have connected well 4 wires, please push the small black piece to the target output voltage, there are 4 voltage slots, as you can see in the label:3.3v 5v 6v and 9v, 4 of them are match to the voltage slot.