Amateur Radio Equipment Side Arm for Rohn 25G Type Tower Sections

Description

The image with the tower section included is of a 2 inch Halyard Arm assembly.  This image is include for installation illustration purposes only.
This side arm can be used to attach weather station equiment, remote video cameras, small VHF/UHF antennas or a pully for raising/lowering HF dipole antennas.
This is the basic 36 inch Side Arm assembly for Rohn 25G style tower.
The outboard end is not drilled so you may drill it to your specifications.
(See images)
The arm is made from 36" x 1" square 6061 T-6 aluminum with a 1/8" wall thickness and has excellent corrosion resistance.
The arm is attached to the tower with two (2) 5/16" U-bolts
Specifications:
The side arm is capable of supporting a 15 pound load.
The U-bolts should be tightened to 8 Ft/Lbs torque (maximum).
Side arm material: 6061 T-6; 1" square aluminum.
Side arm total length: 36 inches (+/- 1/4").
Side arm length beyond the tower legs: approximately 19"
If you have any questions, feel free to contact me.